 |
|
Technical Support & Customer Service via
Online IF YOU SEE THE MUSHROOM BOBBING...LIVE CHAT IS OPEN!
|
|
TURN OFF YOUR POP-UP BLOCKER TO CHAT!!! If you get an Error then, from your Browser, go to Tools > Internet Options > Privacy: Hit Default & Apply
|
How
to Clone a Mushroom
Mushrooms / Shroom cultivation
Materials needed:
Glove Box
Place all of the following items into the Glove Box.
A nice size mushroom. Remember,
you will be tearing the mushroom stem down the middle.
New X-Acto knife (hobby razor)
Sterile Agar petri
dish(s)
91% Alcohol in a small cup
Small alcohol soaked paper towel
Sandwich size Ziploc (one for each petri dish)
Lighter
Cloning is so easy to do you will not believe it!
Everything that I am going to show you should be done within a Glove Box. There is no way to do this without a complete sterile environment.
And away we go!
Plug in the Glove Box that has been prepped for usage.
Place the prepared Agar/petri dishes in the Glove Box. Also place your mushroom, alcohol soaked paper towel...etc into the Glove Box. After placing everything into the Glove Box go ahead and wash your hands with some antibacterial soap.
Dip your razor into the alcohol and flame it with your lighter. Place it on the alcohol towel in order to keep it clean.
Tear
your mushroom down the stem and carefully pick a small piece of flesh from the
inside of the stem with your razor and place it in the
center of the petri dish and quickly replace the lid. Dip your razor into
the alcohol and flame it again. This will eliminate the chance of
"cross-over" contamination. Repeat the process for a total
of three petri dishes in order to guarantee yourself at least one clean petri
dish. If you like you can place a piece of masking tape over opposite
ends of the petri dish before placing it into the baggie. It is not
necessary, but it will hold the dish together to reinsure that it does not accidentally
open and become contaminated.
Place
each petri dish into separate baggies or all three into one.
Place the petri dishes into a warm place,
your underwear drawer is good, and check on it once a day. You will notice
that the mycelium becomes fuzzy and begin to spread over the surface of the
dish. You should be seeing growth in about 2-3 days.
If it is contaminated (and you will know due to the green or black fungus) not all will be lost. Just repeat the same steps, except, you will be transferring non-contaminated mycelium to a new petri dish. Do this until you have a non-contaminated dish.
When the mycelium reaches the edge it is time to use or store the mycelium in the refrigerator (upside down) until you are ready to use it.
From this you will be able to create liquid mycelium and master grain spawn.
Build a Professional Flowhood!
Dangers of Eating Magic Mushrooms
Help Identify These Mushrooms!
